Brinkman 4400 Pro Series Gas Grill Rotisserie Tips

There are a few things that can help you get it right as you operate your Brinkman 4400 pro series

gas grill rotisserie. Check the pre drilled mounting holes on your grill. This is where you should mount the rotisserie.

To install it, position the rotisserie motor on the mounting bracket. Take a look at the motor and make sure that it is turned off. It is a safety precaution that allows you to go through the steps safely.

Obtain one of the forks in the Brinkman 4400 pro series gas grill rotisserie kit and position it on the spit rod. Make sure that the prongs are installed facing away from the wooden handle. Ensure that they fit properly but do not secure or fasten them during this step.

Follow this up by skewering meat with the spit rod. Gently move it to the center of the rod by sliding it. Get the second fork and position it on the spit rod. The correct way of fixing the second rod is by ensuring that the prongs face the meat. Carefully move both forks against the meat. Fasten the fork using the set of screws provided in the kit.

Fixing the rotisserie using the steps outlined above makes it easy to operate it. You can move the loaded spit rod from side to side to check how the food balances on the rod. Rotating the spit rod should easily cause it to move effortlessly. You can position the food appropriately on the spit to balance it.

To turn the Brinkman 4400 Pro Series Gas Grill Rotisserie on, position the loaded spit rod into the motor assembly. Follow this up by supporting the bracket and close the lid. Switch on the rotisserie motor. If you hear erratic noise in from the motor, switch it off and balance the spit rod again. Remember to turn off the rotisserie motor every time you open the grill lid.


Brinkman 4400 pro series gas grill rotisserie to Brinkman gas grills

Brinkman 4400 pro series gas grill rotisserie to barbecue grill